What Is A Swing-Style Garage Door?

The swing-out garage door is a lovely, authentic option that harkens back to the carriage-style garage doors of old. The swing-out style is especially appealing because it’s simple and functional, with only one piece needed for opening or closing your garage door – instead of installing tracks on Agents like overhead garage door openers systems that require much additional room above ground level where they’re installed! A traditional garage-looking yet incredibly versatile type option would be something along these lines: “Swing out save space by eliminating cumbersome parts.”

The horizontal position of commercial garage door openers means that they require more room than overhead doors. To avoid sagging and make your home appear taller, get at least one foot higher for each side – if you choose an automatic system be sure it’s designed specifically with swinging garage door style!

There are two primary choices:

  • The options for opening and closing your automatic garage are varied, depending on how you’d like to work. There’s a two-unit system that mounts directly above each door with an arm extension or retractible jointed rod.
  • A single-track system with a small gliding box that attaches to the garage door tracks on either side, which push or pull your slab up/down depending on if you want it open. It’s typically less expensive than other types of systems too!

What Are Bifold Garage Doors?

The bifold garage door is the perfect solution for those who want to save space and leave more room in their driveway. The compact design of the bifold doors allows you to fit two doors next to each other when open, rather than having one big slab that takes up most of your living area or parking spot! Let’s look into the components of the swinging garage doors, explained by our garage door repair experts in Highlands Ranch.

Components of Swinging Garage Doors

The parts of a true swing garage door are interesting and different from traditional doors. The major components include the following:

Astragal: This is a narrow piece of stuff that is firmly attached to the swinging door’s active slab, which is typically made of wood. It’s designed with one goal: seal and cover up any seams between each leaf when you close it up tight!

Casing: Casing is the finishing material that covers and frames your modern garage door. It covers any gaps, edges, or raw spots on walls to give it an attractive look for people passing by outside of their homes! It’s often used for visual appeals, such as beaded edges or molding on profiles.

Framing: You can’t have a perfect garage without finishing framing the opening. This is done by making up casing and jamb, which ensures your door swings open or shut properly so you don’t damage anything!

Jamb: The exposed studs and headers on your custom garage door can be hidden with a jamb finish which makes the wall look more professional. Your site should also have been routed to accept swing hinges for added convenience, so it’s flush against one exterior surface while hiding any other materials on site!

Shim Space: This planned space is an essential component of installing your new door. This area allows for adjustments and changes, which can be made if the framing isn’t plumb or level enough during installation – especially with active hinges that need extra support in certain areas when opened up at an angle like our contractor did here!

Measuring Swing-Open Garage Doors

When you’re measuring for your new true swing garage door, there is a wide variety of openings that must be considered. Among them, let’s look into 3 important options: Rough opening (the space between two walls), masonry channel (which holds bricks or blocks together), and finished wall. Let’s take a closer look at each of these important aspects and why they’re relevant in this situation!

1. Rough Opening

The location of the new wood frame in the garage door installation defines the rough opening. The bottom of your rough opening must be a subfloor or concrete so that when you install the door, it will operate properly. You can skip this measurement if installing on an existing surface with finished walls because they provide enough space for doors anyway!

2. Masonry Opening

The masonry opening refers to an area of hard, finished material that surrounds the garage door jamb and is required for both new construction and replacement projects.

3. Finished Opening

When the trim is installed around an opening, it should be plumb and level. The opening should be plumb and level, with a casing around the trim to accept hinges. There must also be 1/8″ clearance on all four sides of slabs for proper operation; otherwise, doors will not open or close properly.

Swing-style garage doors can be the perfect and popular choice for garages. There is a wide range of styles and garage door models at Spark Garage Doors Littleton to choose from. Get your garage door from the best garage door manufacturers with the help of Highlands Ranch’s garage door repair experts to get the best quality at the right price.

Contact the garage door repair technicians in Highlands Ranch at Spark Garage Doors Littleton at (720) 902-4081 for more information on our garage door repair services or to schedule an appointment.